Control while printing

While printing, you are able to control the print speed and extrusion rate of your print using the Tuning Adjustment in the Control settings panel. It is based on a percentage of your printing speeds with 1 being 100% of your print speed. Eg. If you are printing at 50 mm/sec and you increase your Speed Multiplier to 1.2, you are now printing at 60 mm/sec. Extrusion Multiplier is used to increase or decrease the amount of material deposited per unit of distance travelled. A lower number here will allow for integrated hinges and tight tolerance parts to move or fit easily.



Have more questions? Submit a request


Please sign in to leave a comment.
Powered by Zendesk