PETT or T-Glase is a unique material as it is considered water-clear or optical polymer where is printed at certain settings, can have optical properties similar to glass. It is also FDA approved and can be used to print parts which can come in contact with food and biological samples.
PETT (Taulman T-Glase) is a high strength filament which can print at a lower
temperature range of 210C-230C in comparison to nylon and can print on a heated bed with hairspray on the glass bed.
We recommend to print 10-20% slower than PLA when printing with T-Glase to ensure the best layer adhesion and appearance.