Print is too weak

Description of the problem: Print can easily be bent and looks fragile. 

Material: Any type of material.

Settings: Standard

Solutions: 

  1. Increase the infill percentage option (Fill density) in MatterControl prior to start your print. A filling density of 50% is normally high enough to ensure a strong structure. To do so, go to Settings>Infill and increase the Fill Density value in percentage (10% is low infill and 70% is high infill) or ratios (0.1 is low infill and 0.7 is high infill).
  2. We recommend to use lines or triangles as your infill type. 
  3. Increase the number of perimeters by selecting Layers/Surface>Outer Surface - Perimeters  
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk